Air conditioning is the process of altering temperature and humidity content of air within a space for favorable conditions. The conditioned air is normally distributed to other areas in the space to improve comfort. There are many methods and devices currently used to achieve this purpose. When in need of the most efficient air conditioning Grand Rapids is among the best places to consider making a visit to.
In more general terms, this process refers to any technology that is concerned with cooling, heating, humidification, dehumidification, air movement, ventilation, and cleaning of air. The devices used for this purpose are called air conditioners and they can be installed in homes as well as automobiles. The devices achieve cooling through simple refrigeration cycles although evaporation is sometimes used in some devices. In construction, the system that ventilates, heats, and conditions spaces is called HVAC.
Willis Carrier is the engineer responsible for inventing the first modern-day conditioning equipment in 1902. These systems have found many uses in buildings since their invention. Major applications include providing proper ventilation, eliminating excess humidity, and maintaining humidity to suitable levels in all areas of conditioned space. Other uses include heating and cooling during cold and warm seasons respectively. The systems can also clean the atmosphere of pollen grains, dust, soot, micro-organisms and many other forms of foreign bodies.
A standard conditioner is able to do both heating and cooling depending on the mode it is operating in. When it is being used for cooling, it blows air currents from the outside into the home. This is achieved by sucking heat from air derived from the atmosphere before blowing it into the home. The device has an evaporator coil over which currents of air are blown to cool them.
Evaporator coils contain a refrigerant which changes state from liquid to gas as it absorbs heat. The refrigerant is pumped outside to give away the heat it absorbed and turn back into a liquid. When the device is being used as a heater, the reverse occurs. The refrigerant turns into a gas in the condenser coils and turns back into a liquid in the evaporator coil giving up the heat it contains. The heat given away is the one that heats rooms.
The coils must be checked and maintained frequently because the coils may burst and cause the refrigerant to leak. The refrigerant is moved around the coils by a pump called a compressor. The compressor is in turn powered by a motor which uses electrical energy. The system gives out cooling energy that is three times that consumed by the compressor. This makes the system very effective.
Conditioning requirements of buildings are estimated through complex calculations to ensure that the systems installed are not overworked. In cases where the refrigerant leaks out, the capacity of the device is adversely affected. Installing too many electrical appliances in the building beyond the recommended number leads to production of more heat which affects the performance of a conditioner.
To improve the efficiency of the equipment, the condenser coil should be located at an open place which can allow heat to be lost easily. Leaves and other forms of debris should be checked to ensure they are not clogging the system. High efficiency devices perform better and consume less energy.
In more general terms, this process refers to any technology that is concerned with cooling, heating, humidification, dehumidification, air movement, ventilation, and cleaning of air. The devices used for this purpose are called air conditioners and they can be installed in homes as well as automobiles. The devices achieve cooling through simple refrigeration cycles although evaporation is sometimes used in some devices. In construction, the system that ventilates, heats, and conditions spaces is called HVAC.
Willis Carrier is the engineer responsible for inventing the first modern-day conditioning equipment in 1902. These systems have found many uses in buildings since their invention. Major applications include providing proper ventilation, eliminating excess humidity, and maintaining humidity to suitable levels in all areas of conditioned space. Other uses include heating and cooling during cold and warm seasons respectively. The systems can also clean the atmosphere of pollen grains, dust, soot, micro-organisms and many other forms of foreign bodies.
A standard conditioner is able to do both heating and cooling depending on the mode it is operating in. When it is being used for cooling, it blows air currents from the outside into the home. This is achieved by sucking heat from air derived from the atmosphere before blowing it into the home. The device has an evaporator coil over which currents of air are blown to cool them.
Evaporator coils contain a refrigerant which changes state from liquid to gas as it absorbs heat. The refrigerant is pumped outside to give away the heat it absorbed and turn back into a liquid. When the device is being used as a heater, the reverse occurs. The refrigerant turns into a gas in the condenser coils and turns back into a liquid in the evaporator coil giving up the heat it contains. The heat given away is the one that heats rooms.
The coils must be checked and maintained frequently because the coils may burst and cause the refrigerant to leak. The refrigerant is moved around the coils by a pump called a compressor. The compressor is in turn powered by a motor which uses electrical energy. The system gives out cooling energy that is three times that consumed by the compressor. This makes the system very effective.
Conditioning requirements of buildings are estimated through complex calculations to ensure that the systems installed are not overworked. In cases where the refrigerant leaks out, the capacity of the device is adversely affected. Installing too many electrical appliances in the building beyond the recommended number leads to production of more heat which affects the performance of a conditioner.
To improve the efficiency of the equipment, the condenser coil should be located at an open place which can allow heat to be lost easily. Leaves and other forms of debris should be checked to ensure they are not clogging the system. High efficiency devices perform better and consume less energy.
About the Author:
You can visit www.artsrefrigerationinc.com for more helpful information about To Find Some Of The Best Devices For Air Conditioning Grand Rapids Is Worth Visiting.
Aucun commentaire:
Enregistrer un commentaire