Recycling all things old is the way to go. It's good for the environment, and it's often a great way to save money. For example, restoring old furnishings is a great way to decorate a home without spending a lot of money. There is no reason to send older pieces of furniture to the landfill when it can grace any home. However, it requires quality furniture stripping and refinishing to make this possible.
The key word is quality stripping. If it's not done right from the get go, there will only be problems in the refinishing stay each. Such problems would be obvious to the naked eye, making the piece look less than favorable. Therefore, it takes the steady hands and good skills, as well as top-of-the-line products that can actually bring such great results.
People like to tackle such projects themselves, especially of late, in this do-it-yourself world. Certainly, it's not a problem when it's just a matter of salvaging a common piece, but it is a problem if it's a valuable one. A valuable antique, for instance, should go directly to the professionals, and should not be refinished by any inexperienced individual.
Certainly, such skill and hard work doesn't come cheap. Professionals to charge quite a hefty sum, depending on the geographical location, and the skill level of the individual. On the other hand, an old piece of furniture could be given a whole new life when taking on this task oneself.
It is important to understand, however, that there is plenty of work involved in stripping and refinishing a wood piece. For starters, one needs to understand what type of finish is currently on the wood, as well as what type of what it really is. These two key points will help dictate which steps to take next, meaning which supplies should be used to strip the wood of the finish.
In some cases, a heat gun would be used to remove the finish, in other cases, a remover that is simply applied with a paintbrush. It is left on for a certain period of time, and then scraped off. After this step is completed, it will then be necessary to sand down the wood. This step can get quite messy, and it begins with a coarser sandpaper, which moves on to a finer one.
After all the sanding is completed, then the surface is to be wiped clean with a tack cloth. This is meant to reduce any dust that could affect the end results. The next step involves painting were staining the piece. There are a few other steps involved, and this is just an introduction to demonstrate the amount of elbow grease required to successfully complete such a project.
One thing is for sure, and that's that of refinished piece of furniture can breathe new life into an entire home. Also, it can be a project that one can be proud of, either because the piece was salvaged, or because it was completed by the individual. One way or the other, this new item can look fabulous in any home.
The key word is quality stripping. If it's not done right from the get go, there will only be problems in the refinishing stay each. Such problems would be obvious to the naked eye, making the piece look less than favorable. Therefore, it takes the steady hands and good skills, as well as top-of-the-line products that can actually bring such great results.
People like to tackle such projects themselves, especially of late, in this do-it-yourself world. Certainly, it's not a problem when it's just a matter of salvaging a common piece, but it is a problem if it's a valuable one. A valuable antique, for instance, should go directly to the professionals, and should not be refinished by any inexperienced individual.
Certainly, such skill and hard work doesn't come cheap. Professionals to charge quite a hefty sum, depending on the geographical location, and the skill level of the individual. On the other hand, an old piece of furniture could be given a whole new life when taking on this task oneself.
It is important to understand, however, that there is plenty of work involved in stripping and refinishing a wood piece. For starters, one needs to understand what type of finish is currently on the wood, as well as what type of what it really is. These two key points will help dictate which steps to take next, meaning which supplies should be used to strip the wood of the finish.
In some cases, a heat gun would be used to remove the finish, in other cases, a remover that is simply applied with a paintbrush. It is left on for a certain period of time, and then scraped off. After this step is completed, it will then be necessary to sand down the wood. This step can get quite messy, and it begins with a coarser sandpaper, which moves on to a finer one.
After all the sanding is completed, then the surface is to be wiped clean with a tack cloth. This is meant to reduce any dust that could affect the end results. The next step involves painting were staining the piece. There are a few other steps involved, and this is just an introduction to demonstrate the amount of elbow grease required to successfully complete such a project.
One thing is for sure, and that's that of refinished piece of furniture can breathe new life into an entire home. Also, it can be a project that one can be proud of, either because the piece was salvaged, or because it was completed by the individual. One way or the other, this new item can look fabulous in any home.
About the Author:
When you are looking for information about furniture stripping, check out the web pages online here today. You can see details at http://www.noopys.com now.
Aucun commentaire:
Enregistrer un commentaire